The CLS has a 5,000 lb capacity that is electronically and mechanically supported by two 5,000 lb stainless steel load cells and mechanical overload protection. The centering pin is welded directly to the scale instead of using mounting bolts that often break. The welded centering pin ensures proper alignment and prevents the scale from sliding laterally off the forklift. This design promotes scale longevity and accuracy.  The scale features a reinforced cover plate to protect the load cells and junction box from debris or damage. The indicator’s sleek stainless steel enclosure and a two-piece mounting assembly with vibration isolators increase durability. With Rice Lake’s Cargo Lift Scale, simply drive up, lift, secure and power up the ready-to-work system.

Due to the unique engineering and manufacturing capability at our suppliers facility in Terre Haute, Indiana; we are adept at providing special designs at standard pricing, usually with only 3 to 4 week lead times.

Examples of these applications would be:
Floor Scale for Underneath a stretch-wrap machine for weighing and wrapping capability
Fitting an existing pit with an odd sized platform
Special loading requirements, such as weighing steel coils or tanks
Floor scale in place of separate tank mounts for greater accuracy and reduced costs– especially in commercial weighing applications requiring Weights and Measures approvals
Unusual platform sizes to accomodate carts or vehicles with large wheelbases
Space restrictions, such as Commercial Laundries where floor space is at a premium
Height issues– either higher or lower than standard design

The PT300DW scale is designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment. Weighing a mere 60 lbs, this sturdy, all aluminum, fully electronic, self-contained wheel load scale is capable of weighing loads up to 30,000 lb and more, with an accuracy of +/- 1%.

Two (2) each platforms with 2 ramps each, Weighbridge – 7′ L x 30″ W x 5 1/2″ H, Stainless steel environmentally-protected load cells, Overall dimensions with ramp – 10′ L x 30″ W x 5 1/2″ H, Capacity – each platform – 30,000 lbs

CWL – 40 Features Low-profile (1.75 inch/44mm high) design with integral transport handle handle, Six strain gauge load cell design, Large enough to weigh dual axles, Corrosion resistant material. A typical portable axle scale system configuration may include: CWL-40 scale with rubber ramps, model 210 indicator with 2XXBATKIT, and model P150 battery-operated tape printer.

Larger PT300DW is also available–22″ x 14″ Platform. This system includes: Two/four/six scales with 20mA output, interconnecting cable, charging cable and carrying case. 22″ wide platform accomodates dual wheels and oversized tires.

PS: The only 6-packs recommended by CCS or CAS are included with the RW wheel weigher.