T-Grip Rubber Molding

Rubber T-Grip Molding

Seal the cracks around your pit-type truck scale to prevent gravel and debris from entering the pit. T-Grip, as its name implies, is better suited for gripping the contact surface with its special barbed ridges. Availabe in various lengths.

T-Grip rubber molding will stop unwanted product from getting into a truck scale pit with its unique design. The “T” section will slip into the gap between the scale platform and the pit wall. The exclusive grips on the vertical section of the “T” hold on to the pit wall and platform to help prevent the belting from being pulled out with the normal flow of traffic.

T-Strip rubber moulding (which we also offer) is used on the sides of the scale platform away from the flow of traffic. The ends of the scale platform should use the T-Grip described above.

T-Grip Molding

Standard Features
• Designed for use in truck scale applications to prevent spill-over into the pit
• EPDM rubber is resistant to impact, tears and weather
• Barbed web to hold molding in place
• Available by the foot or in 10.0 ft (3.1 m), 11.0 ft (3.4 m), 70.0 ft (21.34 m), 80.0 ft (24.4 m) and 100.0 ft (30.5 m) lengths. Maximum continuous length is 100.0 ft (30.5 m)
• Web thickness .22" (5.6 mm)

DIMENSIONS - INCHES (MM)
PART # ....... H ..................W ............... W1 ............. LENGTH
18799 .... 2.56 (65.0) ..... 5.75 (146.1) .... 0.22 (5.6) .... Sold by the foot ........
18800 .... 2.56 (65.0) ..... 5.75 (146.1) .... 0.22 (5.6) ..... 10 ft (3.05m) ............
18801 .... 2.56 (65.0) ..... 5.75 (146.1) .... 0.22 (5.6) ..... 11 ft (3.35m) ............
18802 .... 2.56 (65.0) ..... 5.75 (146.1) .... 0.22 (5.6) ..... 70 ft (21.34m) ..........
33219 .... 2.56 (65.0) ..... 5.75 (146.1) .... 0.22 (5.6) ..... 80 ft (24.4m) ..........
33222 .... 2.56 (65.0) ..... 5.75 (146.1) .... 0.22 (5.6) ..... 100 ft (30.5m) ..........