These load cells are most commonly found in light capacity bench scale applications and are available in capacities ranging from 1 kg through 1,000 kg. Single point load cells are most commonly made of aluminum. Several models are available with the additional protection of stainless steel. At Central Carolina Scale we typically stock the Tedea Huntleigh 1250 and Tedea 1042.
Tedea Huntleigh 1260 Load CellTedea Huntleigh 1260 Single Point, Aluminum High-capacity, off-center loading aluminum single-point load cell is of the two-beam design, and is specially coated to assure durability in harsh environments. Capacities from 50 to 635 kg (110.2 to 1399.9 lb). Complete with 3.1 m/10' of load cell cable, NTEP.
Tedea Huntleigh 1250 Single Point Load CellTedea Huntleigh 1250 Potted Single Point, Aluminum High-capacity off-center loading load cell accurately weighs loads from 50 to 1000 kg (110.2 to 2205.0 lb) and NTEP approved. Load cells with potted cavities are available for improved performance in damp environments.
Tedea Huntleigh 1042 Single Point Load CellTedea Huntleigh 1042 Single Point, Aluminum lower-profile single-point load cell for platform weighing. This model is constructed of aluminum, and is a two-beam design. This design offers high immunity to side forces and is specially coated to provide humidity resistance. 1 to 100 kg. Complete with 10' of cable. NTEP
Tedea Huntleigh 1040 Single Point Load CellTedea Huntleigh 1040 Potted & Unpotted Single Point, Aluminum Low-profile, off-center loading load cell. Designed for direct mounting of weighing platforms, hanging scales and other low capacity beam applications. Load cells with potted cavities are available for improved performance in damp environments.
Tedea-Huntleigh 1022 Single Point Load CellTedea Huntleigh 1022 Single Point, Aluminum very low-profile single-point load cell designed for direct mounting in low-cost platforms. Anodized aluminum construction is combined with two-beam machined technology to provide an affordable load cell option. 3 to 35 kg. Choice of load cell cable length.
Tedea Huntleigh 1010 Single Point Load CellTedea Huntleigh 1010 Potted & Unpotted Single Point, Aluminum off-center loading load cell designed for direct mounting of a weighing platform and simplifying construction of platform scales. Load cells with potted cavities are available for improved performance in damp environments. Capacities from 3 to 90 kg
Tedea Huntleigh 1130 Single Point Load CellTedea Huntleigh 1130 is a low profile stainless steel single point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in harsh environments. The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long term stability over the entire compensated temperature range.
Rice Lake RL1250 Single-Point Load CellRice Lake RL1250 is a High-capacity, off-center-loading load cell accurately that weighs loads from 50 to 1000 kg (110.2 to 2204.6 lb). Long-term stability and durability are maintained. These load cells with potted cavities offer excellent performance in damp environments and NTEP approved.
Rice Lake RL1040 Single Point Load CellRice Lake RL1040 low-profile, off-center loading load cell. Designed for direct mounting of a weighing platform, hanging scales, and other low-capacity beam applications. Potted cavities for improved performance in damp environments. NTEP-certified Integral 10' (3.1m) load cell cable.
Revere HPS Stainless Steel Single Point Point Load CellRevere Transducers HPS is a Low-profile single-point load cell designed for bench scale and checkweigher applications in caustic/acidic environments. Insensitive to off-center loading. Tolerates most severe washdowns. Capacities from 6 and 25 kg to 100 lb. Includes 10'/3.1 m of load cell cable.
Revere Transducers 462 Load CellRevere Transducers 462 is a top quality single point load cell designed for precision. Negligible error from off-center loading. Resistant to severe impact loading. Good water resistance. Capacities from 2 to 250 lb (0.9 to 113.4 kg). Includes 10 ft / 3.1 m of load cell cable.
Scaime Single Point Load Cell Model AGScaime AG load cell features mounting screws which are 1/4-20 UNC (coarse) with 3/4" spacing on both top and bottom. 2 mv/v, 0.02% total error, 415/350 ohms, 3m 6 cond cable, anodized aluminum. NTEP 91-051 S III 5,000 div 5kg - 100kg. Similar to Tedea Model 1040.