Weighing Scale Supplier & Scale Repair Center

Intelligent-Lab HT Analytical Balance

Intelligent-Lab HT Analytical Balance

High quality affordably priced analytical balance with VibraŽ Tuning Fork Inside. Bi-Directional RS232 Interface. Reads in g, mg, ct, oz, lb, oz t, dwt, GN, mommes. Counting, %, Density, Accumulation, Checkweighing, Adjustable Filtering Levels, Below Balance Weighing.


Call: (919) 776-7737

The Intelligent HT Series Analytical laboratory balances are produced in Japan in one of the cleanest facilities you will ever see. The quality of workmanship and attention to detail is superb. Starting at the bottom of the balance, there are three support points, two of which are adjustable to provide leveling. The base contains the revolutionary Vibra double ended tuning fork sensor, which gives almost instant start up because it does not require a warm up time, unlike conventional force restoration balances. Probably the most stable system on the market, the Vibra module is also very resilient against shipping or any movement induced damage. As there is no coil, it is also stable when weighing magnets.

The floor of the weighing chamber is lined with high quality stainless steel and is fitted with a spill ring (to guard the internal components from accidental spillage), an anti-buoyancy plate to ensure air currents within the chamber do not affect the weighing results and a 3.15” diameter platter. There is plenty of room for large, awkward samples to be weighed in the 6 x 6.25 x 9.5” chamber. The weighing chamber of anti-electrostatic material is easily removable to enable proper cleaning of spills and contamination, as regular cleaning is recommended. The three doors give excellent access for operations such as pipette calibration.

intelligent ht series analytical tuning fork balance


The capacity of the balance offers analytical weighing up to 220 g x 0.1 mg, and reads in 9 weighing units, and Easy RES™ which allows you to change between three response times to suit your application. The HT series balance, available from Central Carolina Scale, comes equipped with many programs to match laboratory applications such as GLP, density, parts counting, checkweighing, accumulation, Quick Cal™ calibration, adjustable backlight levels, under balance weighing and Direct to Windows via Serial RS232. The HT Series is a complete solution to any laboratory request for analytical weighing performance. It is supplied with a comprehensive user operation manual to help you get the most out of your investment.


• Vibra® Tuning Fork Inside
• Bi-Directional RS232 Interface via DIN8 and DB-9
• Reads in g, mg, ct, oz, lb, oz t, dwt, GN, mommes
• Counting, %, Density
• Accumulation, Checkweighing
• Adjustable Filtering Levels
• CalQuick™ Single Button Calibration
• Below Balance Weighing
• Pan Size: 3.15" / Anti-Static Draft Shield 8.25"h
• Resistant to Magnetism
• Fast Warm-up Time
• Made in Japan



Model         Part Number        Capacity          Readability
HT-84        2-HT4-S084-121      80 g    0.0001 g (0.1 mg) (External Calibration)
HT-124      2-HT4-S124-121    120 g    0.0001 g (0.1 mg) (External Calibration)
HT-224      2-HT4-S220-121    220 g    0.0001 g (0.1 mg) (External Calibration)
HT-224 R   2-HT4-S220-122    220 g    0.0001 g (0.1 mg) (Internal Calibration)


Density Kit, Printer, SDI Remote Display, Intelligent-Ionizer, Anti-Vibration Plate, Carrying Case, Underweighing Hook