We Rent Test Weights For Checking Elevators

If you check elevators for safety and weight capacity limits then you probably need large calibrated test weights to do the test. We have those weights available for rental in the state of North Carolina. If you need 1000 pound weights we can provide those or 2500 pound weights are also available. Call us at 919-776-7737 or fill out our online form for additional information. We are located in the triangle area near Raleigh, Durham, Fayetteville and Sanford, NC area.

Dimensional Weighing and Measuring of Boxes At Shipping Table

Some companies ship lots of parcels and boxes every single day. Others ship quite a few boxes occasionally and light amounts otherwise. Meanwhile, some companies have hundreds of boxes that ship out to their customers via FedEx or UPS everyday.

At Central Carolina Scale, we ship out quite a few boxes every week and recently noticed a change that you are probably going to start noticing as well if you own a business that ships out packages via UPS Ground.

We’ll focus mostly on UPS since that is our primary carrier but you can probably expect FedEx to do something similar if they’re not already. You see in the past UPS mostly focused dimensional weight rates, aka… dim weight on their expedited services like UPS Red (Next Day Air) or UPS Blue (2nd Day Air). Well, starting in 2015 dim weights apply to the standard UPS Ground charges as well. You can see more at the UPS rates website.

In addition to the announcement that UPS® Ground, Air and International rates will increase an average net 4.9% there is also a mention of dimensional weight pricing.

Dimensional weight pricing will apply to all UPS® Ground services and UPS® Standard to Canada packages. Dimensional weight pricing encourages reductions in excess packaging materials and overall package sizes, leading to reduced fuel use, vehicle emissions and transportation costs.

We should probably give you a quick overview of what dimensional weight is all about. Here is the way UPS describes it. Dimensional weight reflects package density, which is the amount of the space a package occupies in relation to its actual weight. Dimensional weight may apply to all UPS domestic and international package services. Determine the package dimensions in inches. For each dimension, measure at the longest point, rounding each measurement to the nearest whole number (for example, 1.00 to 1.49 will be considered 1, and 1.50 to 1.99 will be considered 2). Measure the length, width and height of the package at its extreme points. If the package has a bulge or is irregularly shaped, include the bulge or irregular aspects of the package. Multiply the package length by the width by the height. The result is the cubic size in inches.

UPS Air Services shipments in U.S.: Divide the cubic size in inches by 166 to determine dimensional weight in pounds. Increase any fraction to the next whole pound.

UPS Ground shipments in U.S.: If the cubic size of the package in inches is 5,184 or larger, divide the cubic size by 166 to determine dimensional weight in pounds. If the cubic size in inches is less than 5,184, use the actual weight of the package. Increase any fraction to the next whole pound.

Effective December 29, 2014, dimensional weight will be used to calculate the billable weight of all UPS Ground packages. For business and industry this creates quite a quandary since it can be very time consuming getting out the tape measure or the yard stick and measuring every single box. Below are a couple of tips that might help you out Continue reading