Truck Scale Calibration Overview

Since 1980, Central Carolina Scale has been providing outstanding weighing equipment and scale repair service for our customers. Our truck scale calibration and inspection service is what our customers depend on to keep their scales accurate and dependable year round.

Most customers choose to have their truck scales checked and calibrated at several predetermined points during the year. We can customize your service based on your needs and requirements. And, by choosing this method of periodic scheduled service; the customer benefits by receiving priority scheduling, reduced labor rates, and discounted parts.

Before our factory trained, state certified scale technicians hit the road, they perform all mandated DOT vehicle inspections. Safety has always been a top priority.

Once our scale technician reaches the job site, the technician will notify the customer. Then the technician blocks off the scale to keep trucks from entering during the inspection and adjustment period. Keep in mind, Central Carolina Scale works with our customers truck traffic to be as accommodating as possible.

truck scale technician

BUILDUP UNDER THE TRUCK SCALE

The next step in a truck scale inspection is to inspect all critical components. Depending on the scale, the technician checks for buildup of dirt, sand, mud and debris underneath the scale. Dirt buildup under the scale platform is often one of the top reasons for scale inaccuracy.

If the truck scale has bumper bolts, the technician will examine these and adjust if necessary. It’s also a good time to look at any other areas that may need to be addressed periodically such as junction boxes, grounding, rubber t-grip molding, load cell caps, pit cleanliness and more depending on the type of scale. The technician also checks cabling, structural steel, and concrete approach pads.

scale calibration test truck

Next, the scale technician will drive the fully loaded test truck across the scale and check the sections for consistency and accuracy. Weights are recorded and used to assist with adjusting.

certified weight cart

Next, the technician unloads all the certified test weights into a specialized weight cart. This cart is also certified by the state weights and measures department and is traceable to NIST. Then, the technician checks each section of the motor truck scale.

When we mention the word “section” we’re referring to an area of weighbridge which bears on two supporting platform points. Once the section testing of the motor truck scale has been completed, the scale can be adjusted and calibrated if needed.

scale test truck on platform

The technician can once again drive across the sections with the fully loaded test truck which includes the certified weights and certified weight cart. The section weights and the overall weights should be consistent and accurate. The calibration and inspection is now complete.

The technician loads his vehicle and reopens the scale for traffic. Once the technician has moved off the scale and the scale has reopened, the technician completes all the necessary paperwork. The inspection detail report shows both the condition of the scale and components, as well as the as found and as left test results.

Central Carolina Scale has the factory trained technicians, certified test weights, and certified test carts to accurately and thoroughly check your vehicle scales. Give us a call today (919) 776-7737 and we can work with you to customize a service plan that will improve your accuracy and limit downtime.